Cleaning The Printer - Kyocera FS-1050 - B/W Laser Printer Service Manual

3-1-3 Cleaning the printer

To avoid print quality problems, the following printer parts must be cleaned with every toner container
replacement.
To clean the printer, first, remove the process unit from the printer.
Open the top cover 1 and front cover 2. Lift the process unit 3 together with the toner container
out of the printer.
NOTE The drum in the process unit is sensitive to light. Never expose the drum even
to normal office lighting (500 lux) for more than five minutes.
Figure 3-1-4 Removing the process unit
3-7
1
2
3
FS-1050