www.emachines.com
DVD drives
File management
Help and Support
For more information about
troubleshooting, click Start, then click
Help and Support. Type the keyword
System Restore in the Search box, then
click the arrow.
Try a different diskette. Occasionally diskettes are flawed and cannot be
■
read by the diskette drive.
Run Error-checking on the diskette. For more information, see
■
the hard drive for errors" on page
If errors are detected and corrected, try using the diskette again.
You see a "Access Denied" or "Write protect" error message
Move the write-protection tab in the upper-right corner of the diskette
■
down (unprotected).
The diskette may be full. Delete unnecessary files on the diskette and try
■
again.
Make sure that the diskette you are using is IBM-compatible.
■
Try a different diskette. Occasionally diskettes are flawed and cannot be
■
read by the diskette drive.
You see a "Disk is full" error message
Delete unnecessary files on the diskette.
■
Try a different diskette. Occasionally diskettes are flawed and cannot be
■
read by the diskette drive.
Run Error checking on the diskette. For more information, see
■
the hard drive for errors" on page
You see a "Non-system disk" or "Disk error" error message
Eject the diskette from the diskette drive, then press E
■
Make sure that the diskette you are using is IBM-compatible.
■
The diskette drive LED is lit continuously
Remove the diskette from the drive. If the light stays on, try restarting your
■
computer.
See "CD or DVD drives" on page
A file was accidentally deleted
If a file was deleted at a DOS prompt or in Windows while holding down the
S
key, the file cannot be restored.
HIFT
To restore deleted files:
Double-click the Recycle Bin icon.
1
Right-click the file you want to restore, then click Restore. The file
2
is restored to the place where it was originally deleted from.
If the Recycle Bin was emptied before you try to restore a file, the
file cannot be restored.
144.
144.
177.
Troubleshooting
"Checking
"Checking
.
NTER
179