www.emachines.com
Closing the case
Replacing the front bezel
Replacing the side panel
To replace the front bezel:
If you disconnected the bezel cables when you removed the bezel,
1
reconnect them to the system board.
Align the latch pins on the bezel with the computer latch holes.
2
Press the bezel firmly into place.
3
To replace the side panel:
Make sure that all of the internal cables are arranged inside the case so
1
they will not be pinched when you close the case.
Align the side panel, then slide the side panel toward the front of the
2
computer to secure it into place.
Replace the side panel thumbscrews.
3
Reconnect the cables and power cord.
4
Closing the case
157