Installing And Configuring Fax; Installing Fax - eMachines T3104 - 256 MB RAM User Manual

CHAPTER 7: Sending and Receiving Faxes

Installing and configuring Fax

Installing Fax

64
This chapter describes using Microsoft Fax and your dial-up modem. You cannot
send or receive a fax using a cable or DSL modem by following these
instructions. Many Internet services exist that let you send or receive faxes using
a broadband connection.
Your dial-up modem cable must be installed before you can send and receive
faxes. You cannot use your standard telephone modem to connect to the
Internet while sending and receiving faxes.
Microsoft Fax lets you send and receive faxes using your dial-up modem. When
Windows was originally installed on your computer, Fax may not have been
installed.
To install Fax:
Click Start, then click Control Panel. The Control Panel window opens.
1
Click/Double-click Add and Remove Programs. The Add or Remove
Programs dialog box opens. Click Add/Remove Windows Components.
The Windows Components Wizard opens.
Click Fax Services, then click Next.
2
Click Finish to exit the Windows Components Wizard.
3
Click Exit to close the Welcome to Microsoft Windows XP dialog box.
4
-OR-
Click Close to close the Add or Remove Programs dialog box.
www.emachines.com