Memory; Memory Card Reader; Modem (Dial-Up) - eMachines T3104 - 256 MB RAM User Manual

Ng3 hardware reference
Hide thumbs Also See for T3104 - 256 MB RAM:
Table of Contents

Advertisement

CHAPTER 14: Troubleshooting

Memory

Help and Support
For more information about
troubleshooting, click Start, then click
Help and Support. Type the keyword
memory error in the Search box, then
click the arrow.

Memory card reader

Modem (dial-up)

184
You get the following "Download Error" message when the Media Center
tries to update the Program Guide:
You must be connected to the Internet to update the Program Guide.
Make sure that your Internet account is set up and connected to the Media
Center computer. For information about manually updating the Program
Guide, see "Manually updating the Media Center Program Guide" on page
19.
You see a "Memory error" message
Use a third-party diagnostic program to help determine if a memory
module is failing.
You see a "Not enough memory" error message
Close all programs, then restart your computer.
Drive letters for the memory card slots do not appear in the My Computer
window
Reboot your computer.
See also
"Internet" on page
Your modem does not dial or does not connect
Make sure that the modem cable is plugged into the modem jack and not
the Ethernet network jack. See
page 11
or your setup poster to make sure that the connections have been
made correctly.
Make sure that your computer is connected to the telephone line and the
telephone line has a dial tone.
Make sure that the modem cable is less than 6 feet (1.8 meters) long.
Remove any line splitters or surge protectors from your telephone line,
then check for a dial tone by plugging a working telephone into the
telephone wall jack.
If you have additional telephone services such as call waiting, call
messaging, or voice mail, make sure that all messages are cleared and call
waiting is disabled before using the modem. Contact your telephone
service to get the correct code to temporarily disable the service. Also
make sure that the modem dialing properties are set correctly.
180.
"Connecting the dial-up modem" on
www.emachines.com

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents