Troubleshooting; Add-In Cards; Audio; Battery - eMachines T3104 - 256 MB RAM User Manual

Ng3 hardware reference
Hide thumbs Also See for T3104 - 256 MB RAM:
Table of Contents

Advertisement

www.emachines.com

Troubleshooting

Add-in cards

Audio

Battery

CD or DVD drives

Troubleshooting topics are listed in alphabetical order.
The computer does not recognize an add-in card
Shut down and restart your computer.
Make sure that you have installed the required software. For more
information, see the documentation that came with your add-in card.
See
"Sound" on page
191.
See
"Power" on page
189.
The computer does not recognize a disc or the CD or DVD drive
Make sure that the disc label is facing up, then try again.
Try a different disc. Occasionally discs are flawed or become scratched and
cannot be read by the CD or DVD drive.
If you are trying to play a DVD, make sure that you have a DVD drive. To
identify your drive type, see
Your computer may be experiencing some temporary memory problems.
Shut down and restart your computer.
Some music CDs have copy protection software. You may not be able to
play these CDs on your computer.
Clean the disc. For more information, see
page
142.
Restart your computer, then enter the BIOS Setup utility by pressing and
holding F1 while your computer restarts. Make sure that the IDE
controllers are enabled.
Make sure that the drive is configured correctly by following the
instructions in the drive documentation.
Reinstall the device driver.
Audio CD does not produce sound
Make sure that the disc label is facing up, then try again.
Some music CDs have copy protection software. You may not be able to
play these CDs on your computer.
"Identifying drive types" on page
"Cleaning CDs or DVDs" on
Troubleshooting
73.
177

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents