Removing The Front Bezel - eMachines T3104 - 256 MB RAM User Manual

CHAPTER 13: Adding and Replacing Components

Removing the front bezel

There are cables connected to the back of
the bezel. When the bezel is loose from
Carefully set the bezel to the side of the
case with the cables attached.
Disconnect the cables from the system
board so you can remove the front bezel
and cables from the computer.
156
Caution
the case:
- OR -
To remove the front bezel:
Position the computer where you can grasp the top front edge of the
■
bezel, then pull the bezel away from the case. Continue to loosen the bezel
until you can remove it from the front of the case.
www.emachines.com