Rear View - IBM 8485E2U Installation Manual

Rear view

The following illustration shows the connectors on the rear of the server.
Power cord
Power supply
error LED
AC power LED
Mouse
Keyboard
Serial 1
Parallel
Video
USB (2)
Ethernet
Serial 2
Power-cord connector
Mouse connector
Keyboard connector
Serial 1 connector
Parallel connector
Video connector
USB connectors
Ethernet connector
Serial 2 connector
Connect the power cord to this connector.
Connect a mouse or other PS/2 device to this connector.
Connect a keyboard PS/2 to this connector.
Connect a 9-pin serial device to this connector.
Connect a parallel device to this connector.
Connect a monitor to this connector.
Connect USB devices to these connectors.
Use this connector to connect the server to a network.
Connect a 9-pin serial device to this connector.
Chapter 3. Server controls, LEDs, and power
35