IBM 8485E2U Installation Manual page 40

User manual
Table of Contents

Advertisement

v The server scans PCI Express x1 slot 2, PCI Express x8 slot 1, and PCI slots 3
v For a list of supported options for the server, see http://www.ibm.com/servers/
For the locations of the expansion slots on the system board and the optional PCI-X
expansion card, see the User's Guide on the IBM xSeries Documentation CD.
Attention:
the server is powered-on might cause the server to stop, which could result in the
loss of data. To avoid this potential problem, always use an electrostatic-discharge
wrist strap or other grounding system when working inside the server with the
power on.
To install an adapter, complete the following steps:
26
xSeries 206m Types 8485 and 8490: Installation Guide
and 4 to assign system resources. If the optional PCI-X expansion card is
attached to the system board, the server also scans PCI-X slots 5 and 6 to
assign additional system resources. Then, the server starts the PCI devices in
the following order, if you have not changed the default startup sequence: PCI
Express x8 slot 1, PCI-X slot 5 (optional), PCI-X slot 6 (optional), PCI Express x1
slot 2, PCI slot 3, and PCI slot 4.
eserver/serverproven/compat/us/.
Static electricity that is released to internal server components when
Expansion-slot
cover
Adapter
Left side
Front adapter
retention bracket
Right side

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xseries 206m84858490

Table of Contents