Internal cable routing and connectors
The following illustration shows the internal routing and connectors for the two SAS
signal cables (in server models with eight SAS drive bays).
Notes:
1. To connect the SAS signal cables, make sure that you first connect the signal
2. To disconnect the SAS signal cables, make sure that you first disconnect the
The SATA cable is a combination power and signal cable with a shared connector
on both ends. The following illustration shows the internal routing and connector for
the SATA cable.
cable, and then the power cable and signal cable.
power cable, and then the signal cable and configuration cable.
Chapter 2. Installing optional devices
41