UpdateXpress System Pack, go to http://www.ibm.com/systems/support/
supportsite.wss/docdisplay?lndocid=SERV-XPRESS&brandind=5000008 or
complete the following steps.
Note: Changes are made periodically to the IBM Web site. The actual procedure
1. Go to http://www.ibm.com/systems/support/.
2. Under Product support, click System x.
3. Under Popular links, click Software and device drivers.
4. Under Related downloads, click UpdateXpress.
Server controls, LEDs, and power
This section describes the controls and light-emitting diodes (LEDs) and how to turn
the server on and off. For the locations of other LEDs on the system board, see
"System-board LEDs" on page 45.
Front view
The following illustration shows the controls, LEDs, and connectors on the front of
the hot-swap server model.
Rack
release
latch
The following illustration shows the controls, LEDs, and connectors on the front of
the simple-swap server model.
Rack
release
latch
v Rack release latches: Press the latches on each front side of the server to
14
IBM System x3550 M2 Types 4198 and 7946: Installation and User's Guide
might vary slightly from what is described in this document.
Hard disk drive
activity LED (green)
Hard disk drive
status LED (amber)
Drive bay 0
Drive bay 2
Drive bay 1
Drive bay 3
Drive bay 0
Drive bay 2
Drive bay 1
Drive bay 3
remove the server from the rack.
Power-control
Operator information
button and LED
panel release latch
Operator
information
Drive bay 4
panel
Drive bay 5
Optical drive
Optional
bay
optical drive
activity LED
Power-control
Operator information
button and LED
panel release latch
Operator
information
panel
Optical drive
Optional
bay
optical drive
activity LED
Video
USB 1
connector
connector
Rack
release
latch
USB 2
connector
Optional
optical drive
eject button
Video
USB 1
connector
connector
Rack
release
latch
USB 2
connector
Optional
optical drive
eject button