To install a DIMM, complete the following steps:
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Turn off the server and peripheral devices and disconnect the power cords and
3. Remove the cover (see "Removing the cover" on page 49).
4. Open the retaining clip on each end of the DIMM connector.
56
IBM System x3550 M2 Types 4198 and 7946: Installation and User's Guide
DIMM 11 connector
DIMM 10 connector
DIMM 9 connector
DIMM 8 connector
DIMM 7 connector
DIMM 6 connector
DIMM 5 connector
on page 46.
all external cables, if necessary.
Attention:
To avoid breaking the retaining clips or damaging the DIMM
connectors, open and close the clips gently.
DIMM 13 connector
DIMM 12 connector
DIMM 14 connector
DIMM 15 connector
DIMM 1 connector
DIMM 2 connector
DIMM 3 connector
DIMM 4 connector
DIMM 16 connector