Features; Functions And Performance; Adaptability - Fujitsu MHT2080AH - 80GB 5400 RPM PATA Hard Drive Product Manual

Device Overview

1.1 Features

1.1.1 Functions and performance

The following features of the disk drive is described.
(1) Compact
The disk drive has 1 disk or 2 disks of 65 mm (2.5 inches) diameter, and its height
is 9.5 mm (0.374 inch).
(2) Large capacity
The disk drive can record up to 40 GB (formatted) on one disk using the 60/63
RLL recording method and 30 recording zone technology. The disk drive has a
formatted capacity of 80 GB (MHT2080AH), 60 GB (MHT2060AH), and 40 GB
(MHT2040AH) respectively.
(3) High-speed Transfer rate
The disk drives have an internal data rate up to 55.4 MB/s. The disk drive
supports an external data rate up to 100 MB/s (U-DMA mode 5).
(4) Average positioning time
Use of a rotary voice coil motor in the head positioning mechanism greatly
increases the positioning speed. The average positioning time is 12 ms (at read).

1.1.2 Adaptability

(1) Power save mode
The power save mode feature for idle operation, stand by and sleep modes makes
The disk drives ideal for applications where power consumption is a factor.
(2) Wide temperature range
The disk drives can be used over a wide temperature range
(5 °C to 55 °C).
(3) Low noise and vibration
In Ready status, the noise of the disk drives is only 25 dBA (measured at 0.3 m
apart from the drive under the idle mode).
(4) High resistance against shock
The Load/Unload mechanism is highly resistant against non-operation shock up to
8820 m/s
1-2
2
(900G).
C141-E195-02EN