Table of Contents
Advertisement
Interface
Bits 7-0:
*21 WORD 94
Bit 15-8:
Bit 7-0:
*22 WORD 100-103
When "48 bit LBA" of the option (customize) is supported, same number of
LBA as WORD 60-61 is displayed.
*23 WORD 128
Bit 15-9:
Bit 8:
Bit 7-6:
Bit 5:
Bit 4:
5-42
'10' = Using the CSEL signal.
'11' = Other method.
Bit 8:
= '1' (In the case of device 1)
In the case of Device 0 (master drive), a valid value is set.
Bit 7:
Reserved
Bit 6:
'1' = Device 1 is selected, Device 0 responds.
Bit 5:
'1' = Device 0, assertion of DASP- was detected.
Bit 4:
'1' = Device 0, assertion of PDIAG- was detected.
Bit 3:
'1' = Device 0, an error was not detected in the self-
diagnosis.
Bit 2, 1:
Method for deciding the device No. of Device 0.
'00' = Reserved
'01' = Using a jumper.
'10' = Using the CSEL signal.
'11' = Other method.
Bit 0:
'1'= (In the case of device 0)
X'FE' Recommended acoustic management value.
X'XX' Current set value.
FE-C0: Performance mode
BF-80: Acoustic mode
00:
Acoustic management is unused it.
(It is same as "FE-CO")
Reserved
Security level. 0: High, 1: Maximum
Reserved
'1' = Enhanced security erase supported
'1' = Security counter expired
C141-E195-02EN
- Quick Links:
- Interface
Hide quick links:
Advertisement
Table of Contents
