Power Commands; Defect Processing; Spare Area - Fujitsu MHT2080AH - 80GB 5400 RPM PATA Hard Drive Product Manual

6.2.2 Power commands

The following commands are available as power commands.
IDLE
IDLE IMMEDIATE
STANDBY
STANDBY IMMEDIATE
SLEEP
CHECK POWER MODE
SET FEATURES (APM setting)

6.3 Defect Processing

This device performs alternating processing where the defective sector is
alternated with the spare area depending on media defect location information.
The media defect location information is registered in the system space specified
for the user area according to the format at shipment of the media from the plant.

6.3.1 Spare area

The following type of area is prepared as the spare area in user areas:
1) Spare cylinder for alternate assignment: This cylinder is used during
automatic alternating processing for defective sector. More than 2000
sectors/drive.
C141-E195-02EN
6.3 Defect Processing
6-9