Replacing A Drive - Western Digital WDBVHT0040JCH User Manual

Replacing a Drive

14
My Book Live Duo is a limited user-serviceable product that allows for replacing the hard
drives in the enclosure.
Important: Only WD Caviar
If the LEDs on the unit are flashing or you have received an alert, the network drive may be
faulty. To determine which drive is faulty, do the following:
1. On the dashboard's navigation panel, click Settings, then click the Storage tab. Review
Drive A and Drive B to determine which drive is faulty.
2. If one of the drives has Failed or Storage Failed?, (select it to view detailed information
on the top of the right panel) and note the letter of the drive (for example, Drive 1).
3. Click the Advanced view and then click the Storage tab.
4. Click the Disk Manager icon.
The "Unassigned" drive is the defective one. The number corresponds to the A or B
color coded decal on the drive, as shown on the next page.
In the event a fault occurs and you would like to service the device yourself, visit WD
Technical Support at
for detailed instructions on obtaining a replacement drive. When contacting Technical
Support, have the following items ready: My Book Live Duo serial number, date of purchase,
and the serial number of the internal hard drive(s) requiring replacement. Once you have
received the replacement drive(s), follow the steps below to replace the faulty drive.
Important: To avoid electrostatic discharge (ESD) problems, ground yourself by
1. Before getting started, power off the unit and disconnect all of its cables.
2. Place the unit on a clean and stable surface.
®
Green™ hard drive assemblies can be inserted into the
My Book Live Duo enclosure. Visit
the knowledge base article 1709 for detailed instructions on obtaining a
replacement drive for this product. Use only WD hard drive assemblies or
your warranty will be voided.
http://support.wdc.com
touching the metal chassis of the computer before handling the device.
http://support.wdc.com
and search the knowledge base article
MY BOOK LIVE DUO
USER MANUAL
and search
1709
REPLACING A DRIVE – 129