Western Digital WDBVHT0040JCH User Manual page 70

MY BOOK LIVE DUO
USER MANUAL
4. To delete an email address, click the Remove link to its right.
Energy Saver
If the Hard Disk Sleep function is enabled, the hard drive goes into standby mode to save
power after a designated period of inactivity. Hard Disk Sleep is enabled by default.
To enable Hard Disk Sleep:
1. Select the Enable check box next to Hard Disk Sleep.
2. With your cursor, move the slider to the number of idle minutes that will trigger standby
mode. Standby must fall between 10 minutes and 1 hour.
3. Click the Save button.
To disable Hard Disk Sleep:
1. Clear the Enable check box next to Hard Disk Sleep.
2. Click the Save button.
CONFIGURING BASIC SETTINGS – 62