Western Digital WDBVHT0040JCH User Manual page 68

Date
Time
2. If you have made any changes, click the Save button.
Updates
This section of the page enables you to set up the drive to update the firmware automatically
or to manually check for an update file:
A description, current version number, and date of last update of the My Book Live Duo
Firmware display.
Important: Wait for the My Book Live Duo drive to finish powering up
(approximately three minutes) before configuring the drive. You will
know it is ready when the LED stops flashing and turns solid green
(normal) or blue (standby).
Check for Update.
To manually check for new firmware availability and to optionally install new firmware:
1. Click the Check for Update button. The "Checking" message displays. If an update is
found, click OK.
2. If desired, click the Install & Reboot button. A progress bar displays. When the process
is complete, the network drive reboots.
Update from File.
To update the firmware manually:
1. Go to the WD Tech Support Downloads page at
download.asp
.
2. On the Downloads page, select My Book. The My Book download page displays.
This field appears if the NTP Service check box is not
selected.
From the drop-down list, select the current month, day,
and year
This field appears if the NTP Service check box is not
selected.
From the drop-down list, select the current hour, minutes,
and time period (i.e., AM, PM).
upport.wdc.com/products/
http://s
CONFIGURING BASIC SETTINGS – 60
MY BOOK LIVE DUO
USER MANUAL