Table of Contents
Advertisement
COMPONENT NAMES (continued)
Remote control
POWER OFF button 15
POWER ON button
MUTE button
RGB/VIDEO buttons
AUTO button
MENU button
Loading Batteries
1. Open the battery cover.
• Slide back and remove the battery
cover in the direction of the arrow.
2. Load the batteries.
• Load the two Size AA batteries included, matching polarity
markings on the batteries to those on
the case.
3. Close the battery cover.
• Replace the battery cover in the
direction of the arrow and snap it back
into place.
CAUTION
• Do not use new and old batteries together. The batteries could
explode or leak, resulting in fires, physical injury, or stains.
• When loading batteries, observe their correct polarities as
marked on the product. If loaded in the wrong direction, the
batteries could explode or leak, resulting in fires, physical injury,
or stains.
15
16
16
RGB 1
P
P button
18
IN
AUTO
32
32
ID button
32
OK button
32
VOL
RGB 2
MUTE
AV1
AV2
AV3
AV4
P
P
SIZE
RECALL
IN
MENU
OK
ID
ID SET
Handling the Remote Control
Use the remote control within 5m from the front of the unit, within a
30 degree arc either side of the remote control sensor.
ATTENTION
• Do not drop or exert undue force on the remote control.
• To avoid possible failures. Do not splash the remote control with
water or put it on a wet object.
• If you do not intend to use the remote control for an extended
period of time, remove the batteries from it.
• If the remote control begins to lack responsiveness, replace the
batteries.
• Strong light such as direct sunlight impinging on the
photoreceptor of the remote control can cause operational
failure. Position this unit to avoid direct contact with such light.
POWER ON/OFF button
15
VOLUME UP/DOWN buttons
16
SIZE button
17
RECALL button
18
18
RETURN button
SELECT/ADJUST button
32
ID SET button
32
With in 30
With in 30
degrees
degrees
About 3m
About 3m
About 5m
RGB 1
RGB 2
MUTE
VOL
AV1
AV2
AV3
AV4
AUTO
P
IN
P
SIZE
RECALL
MENU
OK
ID
ID SET
11
Advertisement
Table of Contents
Troubleshooting
