Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
Installation
• If you have purchased the model without the pedestal attached:
When installing the monitor, use the optional pedestal.
The pedestal has been used for the illustrations in this manual.
CAUTION
• Use one of commercially available mount units to install this product. A mount of insufficient
strength or inadequate design can cause overturning or dropping and result in fire, electrical
shock or injury. Please note that our company assumes absolutely no responsibility for
personal injuries or property damage caused by improper installation.
• Installation of the wall mount unit and ceiling mount unit can be dangerous, so do not attempt
this work yourself. Ask your dealer to provide the name of a qualified installer.
• In order to prevent an internal temperature increase, maintain a space of 10cm (4 inches :
For a desktop set-up) or more between the sides and other objects such as walls, etc.,
so that the ventilation holes are not blocked. (✻)
Anti-tumble measures
CAUTION
Have this unit mounted in a stable place. Take measures to prevent it from tumbling down to avoid possible physical injury.
Securing to a wall or pillar
Use a commercially available cord or chain, and a clamp to secure the set to a firm wall or
pillar.
Securing to a desktop
1)Using wood screws (two), fasten the set to the clamping screw holes on the rear of the pedestal as shown.
2)Using commercially available wood screws, secure the set firmly in position.
12
10cm (4 inches) or more
clamp
Hook
Cord or Chain
clamp
*
cord or chain
Wall or Pillar
cord or chain
Wall or Pillar
Wood screw
Two places
Advertisement
Table of Contents
Troubleshooting
