Operating Instructions; Turning Power On And Off - Yamaha PDM-5520 User Manual

OPERATING INSTRUCTIONS

Main power switch
SUB-POWER button
POWER OFF
button
POWER ON
button
RGB 1 RGB 2
AV1 AV2
AUTO P P
IN
MENU
OK
ID
Indicating lamp
POWER ON/OFF
button
VOL
MUTE
AV3 AV4
SIZE RECALL
ID SET

Turning Power On and Off

• To turn the monitor power on, press the main power
switch on the monitor to ON, and then press the SUB
POWER button or the ON/OFF or ON button on the
remote control.
• To turn the monitor power off, press the SUB POWER
button or the ON/OFF or OFF button on the remote
control, and then set the main power switch on the
monitor to OFF.
• During normal use, the main power switch is set in the ON
position, and the monitor can then be turned ON/OFF using the
SUB POWER button or the ON/OFF button on the remote control.
Indicating lamp
Indicating
Power status
lamp
Off Off
Off
Lights red
(standby)
Lights green On
Off
Lights orange
(Power Save)
When the indicating lamp lights orange or the message "No Sync.
Signal", "Power Save" or "Invalid Scan Freq." appears on the
screen, see "Power Save Mode" or "Symptoms That Appear to be
Failures."
38 40
ATTENTION
• Avoid repeatedly turning the monitor on and off at short
intervals. Failures might result from such operation.
• Turn off the main power switch if you do not plan to use the
monitor for an extended period of time.
• If a power failure occurs while the monitor is running, it will be
powered on upon recovery from the failure. Turn off the unit
main power switch before you leave the area in which the
monitor is located.
Operating
When the main power switch is set
to OFF.
When the main power switch is
ON, and the OFF button on the
remote control or the SUB POWER
button on the underside of the front
of the frame is OFF.
When the main power switch is
ON, and the ON button on the
remote control or the SUB POWER
button on the underside of the front
of the frame is ON.
When the main power switch is
ON, and the ON button on the
remote control or the SUB POWER
button on the underside of the front
of the frame is ON.
However, the indicator also light
orange when the unit is in POWER
SAVE mode.
15