Installation Instructions For Pc; Connecting To A Pc - Yamaha PDM-5520 User Manual

Hd plasma monitor
Hide thumbs Also See for PDM-5520:
Table of Contents

Advertisement

INSTALLATION INSTRUCTIONS FOR PC

Read CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. and PRECAUTIONS (
carefully to ensure maximum safety before proceeding to these steps:
• Choose a safe, level location to install the product.
• Install the monitor in a location with easy access to a power socket.
• Make sure that the power switch of this device is turned off.

Connecting to a PC

(1) Make sure that the display signal of the personal computer to be used is compatible with the specifications of this
device.
• See "Product Specifications for PC" concerning the specifications of this device.
(2) Make sure that the power switch of the personal computer is turned off.
(3) Connect the signal input terminal (RGB 1 or RGB 2) on the rear panel of this monitor to the display signal output
terminal of the personal computer.
• Use a cable that fits the input terminal of this device and the output terminal of the personal computer.
• Depending on the type of personal computer being connected, the use of an optional conversion adapter or the adapter provided with
the personal computer may be necessary in some cases. For details, refer to the instruction manual of the personal computer, or ask the
personal computer manufacturer or your local retail dealer.
Speaker (R)
Monitor rear panel
Power cable
connector
Power
cord
(DVI)
(D-sub)
To signal
To signal
output
output
terminal
terminal
43
45
~
Speaker (L)
SUB WOOFER
3.5mm
Stereo
(RCA pin plug)
mini jack
To audio
sub woofer
To audio
output
terminal
PC
to
)
6
9
27

Advertisement

Table of Contents
loading

Table of Contents