Setup Menu - Yamaha PDM-5520 User Manual

OPERATING INSTRUCTIONS FOR PC (continued)

SETUP MENU

MENU
➛
➛
Selected characters
Auto Adjust*
Horizontal Position
Vertical Position
Horizontal Clock
Clock Phase
Reset
Input Level
Frequency Display
WVGA Type
WXGA Mode
Vertical Filter
Frequency Mode
RGB1
RGB2
* Depending on the type of signal displayed, displays may not be optimized through automatic adjustment. Adjust manually to optimize them.
36
Picture
Audio
Timer
Function
Setup
Language
Select
OK Set
(Menu)
Moves the horizontal position to left.
Moves down the vertical position.
Reduces the dot clock frequency
(shrinks the right side).
Slows the dot clock phase
(shifts slightly to left).
0.7V
Off
Off
Off 1280x768
Off
Movie
Setup
Auto Adjust
Horizontal Position
OK
Vertical Position
Horizontal Clock
➛
Clock Phase
Reset
Select Return
Setup
Auto Adjust
Horizontal Position
Vertical Position
Horizontal Clock
Clock Phase
Reset
Select Return
Setup
Input Level
Frequency Display
WVGA Type
WXGA Mode
Vertical Filter
Frequency Mode
RGB1
RGB2
Select Set
(Adjust)
Horizontal Position, Vertical Position, Horizontal Clock and Clock
Press the OK button to start
Phase are adjusted automatically.
automatic regulation.
Moves the horizontal position to right.
Adjust the horizontal display position.
(This function is only for RGB2. It is not available (grayed out)
for RGB1.)
Moves up the vertical position.
Adjust the vertical display position.
(This function is only for RGB2. It is not available (grayed out)
for RGB1.)
Increases the dot clock frequency
Adjust for maximum character clarity.
(expands the right side).
(This function is only for RGB2. It is not available (grayed out)
for RGB1.)
Advances the dot clock phase
Adjust for clear character visibility.
(shifts slightly to right).
(This function is only for RGB2. It is not available (grayed out)
for RGB1.)
The original factory settings for the items of this Menu page can be
(Selects the Reste mode)
restored by pressing the OK button. (This is effective only for RGB2.)
Normally set to 0.7 V. If white is found to spread across the
1.0V
screen, set to 1.0 V. (This is effective only for RGB2.)
On Set this to Off if the frequency information of the Input Signal
Screen Display is not required.
This is only available for W-VGA signal.
On
When it is set to On, the display area mode can be selected Full or Real.
This is only available for W-XGA signal.
1366x768
When it is set to On, the display area mode can be selected Full
or Real. (RGB2 (ANALOG) INPUT only)
On
Turn On when concerned about screen flicker.
Set to Movie when viewing moving images on a personal
PC
computer.
23
Adjust
0
OK
+ 31
– 20
➛
10
Reset
Exit
Horizontal Position
Next / Prev
OK
Adjust
0
➛
+ 31
– 20
10
Reset
Exit
Clock Phase
Next / Prev
0.7V
Off
Off
Off
On
Movie
DVI-PC
RGB
Return
Setup hint
0
Adjust Return
10
Adjust Return