Power Save Mode; When Hdmi/Composite Input Is Selected; When Rgb Input Is Selected - Hitachi UT42X902 - 42" LCD Flat Panel Display Operating Manual

FUNCTION (continued)

Power Save Mode

When HDMI/Composite Input is Selected

You are provided the function to save power consumption when no signal is
detected in the HDMI/Composite input. Set to On in "Video Power Save" from the
Setup Menu, which leads to the power save mode.
1. Press the
button when in HDMI/Composite mode.
2. Select the "Setup" menu and press the
3. Select "Video Power Save".
Video Power Save
When no signal is detected
Condition
Power Save

When RGB Input is Selected

When the unit is connected to a VESA DPMS computer, the Power Save mode (Operation mode : Off) can be set to
be activated automatically when the computer is not being used, in order to reduce the power consumption of the
unit.
RGB sync signal
PC signal
Operation mode
Indicating lamp
To return to operating status, operate the personal computer, or press either the Input Select button on the control
panel or the or
button.
OK
Off
On
When signal is input during
On in "Video Power Save"
Indicating Lamp
Orange
Horizontal
Vertical
Active (normal display)
Lights green
button on the remote control.
Turns On automatically.
Yes No
Yes Yes
On
Setup
Video Power Save Off
RGB Input RGB
Color System Auto
Select On/Off Return
Yes No
No No
Blank (no display)
Off
Lights orange
44