How To Use The On-Screen Display (Osd) System; Select Language - Hitachi UT42X902 - 42" LCD Flat Panel Display Operating Manual

SETUP OPERATION

How to Use the On-Screen Display (OSD) System

You can use the On-Screen Display system to access the various kinds of the features and functions.
Basic Operation
1. Press the
button on the remote control or the Menu button on the
control panel of the unit. The Main Menu is displayed on the screen as
shown on the right.
2. To select the item, press the
The selected item will be highlighted in Yellow.
3. Press the
button to set your selection.
OK
The selected menu page will be displayed on the screen.
4. Use the
button to choose the item on the menu page.
Press the button to set your selection.
OK
5. Use the
button to adjust the item values or choose options.
◄►
Press the button to set your selection.
OK
6. To exit from the menu, press the
NOTE
The OSD menu screen will be closed automatically when no operation has
been made for about one minute.
If the item on the menu is shown in gray, it means that it cannot be selected
or adjusted.

Select Language

Select the language from the list so that the OSD menu can be displayed in the selected language.
The default setting is English (US).
How to set Language
1. Enter the "Language" menu from the Main Menu.
2. Select your preferred language from the list using the
The selected item will be highlighted in Yellow.
3. Press the
button to set your selection.
OK
The mark on the left turns into a double circle when the selection is fixed.
4. Press the
button to exit from the entire OSD menu.
33
button.
or the button.
Menu button
button.
Picture
Audio
Function
Setup
Language
Select OK Set
<Main Menu>
Menu button
Language
English
English (US)
Français
Español
Deutsch
Select OK Set Return