Connecting To A Pc; Attach Cushion, Secure With Clamps And Fit Terminal Cover - Hitachi UT42X902 - 42" LCD Flat Panel Display Operating Manual

CONNECTION (continued)
2. Connect your Equipment to the Monitor (continued)

Connecting to a PC

The PC connection terminal (D-sub 15 pin) + the PC (RGB)/DVI Analog Audio Input terminal are connected to
the PC, allowing an analog RGB signal.
NOTE
About the connection of D-sub 15 pin, see

3. Attach Cushion, Secure with Clamps and Fit Terminal Cover

1
Attach the supplied cushion around the HDMI cable.
Cushion
(supplied
accessory)
2 Unfasten 2 clamps, and then connect the HDMI cable and power cord
to the monitor through open clamps.
AUDIO
(Audio)
(D-sub 15 Pin)
for details .
13
HDMI cable
HDMI cable
IN
or
Attach the cushion around
the HDMI cable so as not
to leave any clearance.
Clamp Power cord
*This drawing shows UT37X902
OUT
[Example]
20