Function; Hdmi/Composite Signal Input; Display Aspect - Hitachi UT42X902 - 42" LCD Flat Panel Display Operating Manual

FUNCTION

Aspect Switching
Each time the button of the remote control is pressed, the screen display aspect
ASPECT
is switched in sequence, and the status will be displayed at the bottom of the screen.

HDMI/Composite Signal Input

Display Aspect

Watching Standard Definition Pictures (480i, 480p, 576i, 576p, Composite)
4:3 Panoramic 1
Full
Watching High Definition Pictures (720p, 1080i, 1080p)
Full 1 Full 2
You can display the image at its optimum condition by selecting display aspect depending on the current output
image as shown below.
Display
Input Signal
Screen
When Watching Standard Definition Pictures:
(4:3 Signal)
(Vista)
(Cinema)
(Squeeze)
When Watching High Definition Pictures:
(16:9 Signal)
(4:3 Image in
16:9 Frame)
Panoramic 2 Zoom 1
Zoom 2
Zoom
Display
Aspect
Plays a 4:3 image on screen faithfully. Blanking occurs on
4:3
both sides.
Plays a 4:3 image which enlarges horizontal and vertical size of
Panoramic 1 the middle in equal scales, and displays both sides appearing
much wider.
The vertical size of Panoramic1 is reduced so that you can
Panoramic 2 see the whole image, including any subtitles, that might
otherwise not be fully visible on the screen.
Plays a 16:9 image in 4:3 frame (Vista aspect) faithfully.
Zoom 1 *In some cases, slight blanking may remain at the top and
bottom.
Plays a 21:9 image in 4:3 frame (Cinema aspect) expanding
vertically.
Zoom 2
*In some cases, slight blanking may remain at the top and
bottom.
Plays a 4:3 image faithfully in the standard vertical size and
Full
horizontally squeezed.
Full 1 Plays a 16:9 image faithfully showing 95% of the size.
Plays a 16:9 image faithfully showing 100% of the size.
Full 2 *In some cases, the screen display has unnecessary
blanking or noise at the edges.
Plays a 4:3 image in 16:9 frame by enlarging a 4:3 image to fill
Zoom
the 16:9 screen.
Aspect button
To display suitable screen as follows.
42