NETGEAR GS110TP - ProSafe Gigabit Smart Switch Software Administration Manual page 41

GS108T and GS110TP Smart Switch Software Administration Manual
The SNTP Server Status table displays status information about the SNTP servers
configured on your switch. The following table describes the SNTP Global Status fields.
Field
Address
Last Update Time
Last Attempt Time
Last Attempt Status
Requests
Failed Requests
Click Refresh to refresh the page with the most current data from the switch.
Description
Specifies all the existing Server Addresses. If no Server configuration exists,
a message saying "No SNTP server exists" flashes on the screen.
Specifies the local date and time (UTC) that the response from this server
was used to update the system clock.
Specifies the local date and time (UTC) that this SNTP server was last
queried.
Specifies the status of the last SNTP request to this server. If no packet has
been received from this server, a status of Other is displayed:
Other: None of the following enumeration values.
•
Success: The SNTP operation was successful and the system time was
•
updated.
Request Timed Out: A directed SNTP request timed out without receiving
•
a response from the SNTP server.
Bad Date Encoded: The time provided by the SNTP server is not valid.
•
Version Not Supported: The SNTP version supported by the server is not
•
compatible with the version supported by the client.
Server Unsynchronized: The SNTP server is not synchronized with its
•
peers. This is indicated via the 'leap indicator' field on the SNTP
message.
Server Kiss Of Death: The SNTP server indicated that no further queries
•
were to be sent to this server. This is indicated by a stratum field equal
to 0 in a message received from a server.
Specifies the number of SNTP requests made to this server since last agent
reboot.
Specifies the number of failed SNTP requests made to this server since last
reboot.
Chapter 2: Configuring System Information | 41