NETGEAR GS110TP - ProSafe Gigabit Smart Switch Software Administration Manual page 154

Click Cancel to cancel the configuration on the screen and reset the data on the screen to
3.
the latest value of the switch.
If you make any changes to the page, click Apply to apply the new settings to the system.
4.
TACACS+ Server Configuration
Use the TACACS+ Server Configuration page to configure up to five TACACS+ servers with
which the switch can communicate.
To display the TACACS+ Server Configuration page, click Security  Management Security,
and then click the TACACS+  Server Configuration link.
To configure TACACS+ server settings:
To add a new TACACS+ server, select Add from the TACACS+ Server field, enter the
1.
IP address of the server to add, and click Apply.
The Add option is available if fewer than five TACACS+ servers are
Note:
configured on the system, and the Server Address field is only
available when Add is selected in the TACACS+ Server IP Address
field.
After you add one or more TACACS+ servers, additional fields appear on the TACACS+
Server Configuration page.
154 | Chapter 5: Managing Device Security
GS108T and GS110TP Smart Switch Software Administration Manual