NETGEAR GS110TP - ProSafe Gigabit Smart Switch Software Administration Manual page 233

GS108T and GS110TP Smart Switch Software Administration Manual
MaxFail. Specify the maximum number of failures allowed in the session. The valid
•
range is 0–255.
Interval. Specify the time between probes in seconds. The valid range is 1–60.
•
Port. Specify the UDP destination port in probe packets. The valid range is 1–65535.
•
Size. Specify the size of probe packets. The valid range is 0–65507.
•
Click Cancel to cancel the operation on the screen and reset the data on the screen to the
3.
latest value of the switch.
Click Apply to initiate the traceroute. The results display in the TraceRoute area.
4.
Chapter 7: Maintaining the System | 233