NETGEAR GS110TP - ProSafe Gigabit Smart Switch Software Administration Manual page 230

The following table describes the information on the Dual Image Status page.
Field
Unit
Image1 Ver
Image2 Ver
Current-active
Next-active
Image1 Description
Image2 Description
Click Refresh to display the latest information from the switch.
For information about how to update or change the system images, see
page 228.
230 | Chapter 7: Maintaining the System
GS108T and GS110TP Smart Switch Software Administration Manual
Description
The unit ID of the switch is always 1.
Displays the version of the image1 code file.
Displays the version of the image2 code file.
Displays the currently active image on this switch.
Displays the image to be used on the next restart of this switch.
Displays the description associated with the image1 code file.
Displays the description associated with the image2 code file.
on
File Management