Printing Position - Epson TM U295 - B/W Dot-matrix Printer Operator's Manual

Printing position

Notes
1. The mechanical form stopper is adjustable in the range 26.5 to
36.5 mm (1.04 to 1.44").
2. The TOF and BOF sensors are fixed and cannot be adjusted.
3. After slip paper is set at the mechanical form stopper, the top
margin can be shortened up to 21.2 mm (.83") by feeding the
paper backwards (ejection feeding).
4. When ejection feeding is not performed after printing, printing
can be performed up to the position at which the paper edge is
no longer held by the paper feed roller (13.8 mm (.54") from the
paper edge).
5. When ejection feeding is performed after printing, the paper
can be fed forward up to 11.8 mm (.46") (28 dots) after the
bottom edge is detected.
Adjustable
Paper feed roller
NOTE 1. Mechanical form stopper
NOTE 2. TOF sensor (fixed)
Printing position at minimum top margin
65.84 (2.59")
First printing position
Last printing position
NOTE 2. BOF sensor (fixed)
Reference Information 4-5
12.5 (.49")
5 (.20")
12.5 (.49")