Epson TM U295 - B/W Dot-matrix Printer Operator's Manual page 57

Double-density bit image: ESC
Paper release: ESC q
• The following commands are settable but do not have any effect
in page mode.
Upside-down character mode: ESC {
7
• This command is effective only in standard mode.
• ESC @ command returns the printer to standard mode without
printing any data.
[Default] Standard mode
[Reference] FF
ESC R n
[Name] Select an international character set
[Format] ASCII
Hex
Decimal
[Range] 0 n 10
[Description] Selects an international character set n from the following table:
n Character set
0 U.S.A.
1 France
2 Germany
3 U.K.
4 Denmark I
5 Sweden
6 Italy
7 Spain
8 Japan
9 Norway
10 Denmark II
[Note] If the value of n is out of specified range, printer ignores the
command.
[Default] n = 0
Character Code Tables
[Reference]
7 font and underline mode specification and cancel: ESC !
ESC R
1B 52
27 82
n
n
n
Commands 5-17