Epson TM U295 - B/W Dot-matrix Printer Operator's Manual page 44

n = 1: Printer status
Bit Off/On
0 Off
1 On
Off
2
On
Off
3
On
4 On
Off
5
On
Off
6
On
7 Off
n = 2: Off-line status
Bit Off/On
0 Off
1 On
Off
2
On
5-4 Commands
• This command should not be used within the data sequence of
another command that consists of 2 or more bytes. For example,
If you attempt to transmit ESC 3 n to the printer, but DTR (DSR
for the host computer) goes to MARK before n is transmitted
and then DLE EOT 3 interrupts before n is received, the code
<10>H for DLE EOT 3 is processed as the code for ESC 3
<10>H.
• When Auto Status Back (ASB) is enabled using the GS a
command, the status transmitted by the DLE EOT command and
the ASB status must be differentiated.
• If the n is out of the specified range, the printer ignores this
command.
Hex Decimal
00 0
02 2
00 0
04 4
00 0
08 8
10 16
00 0
20 32
00 0
40 64
00 0
Hex Decimal
00 0
02 2
00 0
04 4
Function
Not used. Fixed to Off.
Not used. Fixed to On.
Drawer kick-out signal is LOW (connector pin 3)
Drawer kick-out signal is HIGH (connector pin 3)
On-line.
Off-line.
Not used. Fixed to On.
Undefined.
Undefined.
Undefined.
Undefined.
Not used. Fixed to Off.
Function
Not used. Fixed to Off.
Not used. Fixed to On.
Undefined.
Undefined.