Epson TM U295 - B/W Dot-matrix Printer Operator's Manual page 62

[Range]
[Description] Enables or disables the panel buttons.
[Notes]
[Default]
ESC d n
[Name]
[Format]
[Range]
[Description] Prints the data in the print buffer and feeds n lines.
[Notes]
[Reference]
ESC e n
[Name]
[Format]
[Range]
[Description] Prints the data in the print buffer and feeds n lines in the reverse
[Notes]
ESC f t1 t2
[Name]
[Format]
[Range]
5-22 Commands
Decimal 27
0 n 255
• When the LSB of n is 0, the panel buttons are enabled.
• When the LSB of n is 1, the panel buttons are disabled.
• When the panel buttons are disabled, none of them are usable
when the printer cover is closed.
n = 0
Print and feed n lines
ASCII ESC
Hex 1B
Decimal 27
0 n 255
• This command sets the print starting position to the beginning of
the line.
• This command does not affect the line spacing set by ESC 2 or
ESC 3.
ESC 2, ESC 3
Print and reverse feed n lines
ASCII ESC
Hex 1B
Decimal 27
0 n 255
direction.
• The command is available only in standard mode.
• This command sets the print position to the beginning of the line.
• The setting values do not remain.
Set cut sheet wait time
ASCII ESC
Hex 1B
Decimal 27
t1 = 0
0 t2 64
99 53
d n
64 n
100 n
e n
65 n
101 n
f t1
66 t1
102 t1
n
t2
t2
t2