Epson TM U295 - B/W Dot-matrix Printer Operator's Manual page 46

n = 5: Slip paper status
Bit Off/On
0 Off
1 On
2 Off
Off
3
On
4 On
Off
5
On
Off
6
On
7 Off
Bit 3:
Bit 5 and 6:
[Reference]
CAN
[Name]
[Format]
[Description] In page mode, deletes all the print data in the current printable area.
[Notes]
[Reference]
ESC SP n
[Name]
[Format]
[Range]
5-6 Commands
Hex Decimal
00 0
02 2
00 0
00 0
08 8
10 16
00 0
20 32
00 0
40 64
00 0
Becomes Off (not waiting) just before actual slip selection takes place
after slip paper is detected
Transmits the current status of the TOF and BOF sensors.
ESC u, ESC v, GS a
Cancel print data in page mode
ASCII CAN
Hex 18
Decimal 24
• This command is enabled only in page mode.
• If data that existed in the previously specified printable area also
exists in the currently specified printable area, it is deleted.
ESC W
Set right-side character spacing
ASCII ESC
Hex 1B
Decimal 27
0 n 32
Function
Not used. Fixed to Off.
Not used. Fixed to Off.
Slip paper selected.
Does not wait for slip paper insertion.
Waits for slip paper insertion.
Not used. Fixed to On.
Slip is detected by the BOF sensor.
Slip is not detected by the BOF sensor.
Slip is not detected by the TOF sensor.
Slip is detected by the TOF sensor.
Not used. Fixed to Off.
SP n
20 n
32 n