Epson TM U295 - B/W Dot-matrix Printer Operator's Manual page 48

[Notes]
[Default]
ESC % n
[Name]
[Format]
[Range]
[Description] Selects or cancels the user-defined character set.
[Notes]
[Default]
[Reference]
ESC & y c1 c2 [X [d] y x]
[Name]
[Format]
[Range]
[Description] Defines user-defined characters.
5-8 Commands
• The printer can underline all characters (including the right-side
character spacing), but cannot underline the space set by an HT.
• When both double-height and double-width modes are selected,
quadruple size characters are printed.
• Only setting of underline mode specification have effect in page
mode.
• Only setting of 7
n = 0
Select/cancel user-defined character set
ASCII ESC
Hex 1B
Decimal 27
0 n 255
When the Least Significant Bit (LSB) is 0, the user-defined character
set is cancelled.
When the LSB is 1, the user-defined character set is selected.
• When the user-defined character set is cancelled, the internal
character set is automatically selected.
n = 0
ESC &
Define user-defined characters
ASCII ESC
Hex 1B
Decimal 27
y = 1
32 c1 c2 126
0 x 6 (5 7 font)
0 x 10 (7 7 font)
0 d1 ... dy x 255
• The y specifies the number of bytes in the vertical direction.
• c1 specifies the beginning character code for the definition, and c2
specifies the final code. When only one character is desired, use c1
= c2.
• The allowable character code range is from decimal code 32 to 126.
• x specifies the number of dots in the horizontal direction.
7 font specification have effect in page mode.
n
%
n
25
37 n
c2-c1+1
& y c1 c2 [x [d] y
26 y c1 c2 [x [d] y
38 y c1 c2 [x [d] y
x] c2 - c1 + 1
x] c2 - c1 + 1
x] c2 - c1 + 1