Table of Contents
Advertisement
Messages
The following messages may be displayed on the LCD monitor during
camera operation.
Alarm set
Battery depleted
Camera cannot display
this image
Card locked
Card not formatted
Compression error
Data being recorded
Data error
Deleting
Formatting
Image folder could not
be created
Image protected
Memory card error
Memory card full
No card in camera
10
No image & sound
No ink
112
This is displayed when the alarm is set and the camera is
about to be automatically turned off.
The battery is exhausted.Replace the battery.(p.13)
You are trying to play back an image not supported by this
camera.You may be able to display this on a PC or another
brand of camera.
The SD Memory Card is write protected. (p.19)
The SD Memory Card you have inserted is unformatted or
has been formatted on a PC or other device and is not
compatible with the camera.(p.97)
Compression of the image you captured has failed.Change
the recorded pixels or quality level, and take a picture again.
The image/voice recording is being recorded on the SD
Memory Card.
Displayed when the printer was unable to process the data
in PictBridge mode.
An images or sound on the SD Memory Card is being
deleted.
The SD Memory Card is being formatted.
The maximum file number has been used, and no more
images or sound can be saved.Insert a new SD Memory
Card or format the card.(p.16, 97)
This is displayed when you try to delete a protected image.
Shooting and playback are impossible due to a problem
with the SD Memory Card.Try displaying it on a PC.
The SD Memory Card memory is full and no more images
or sound can be saved.Insert a new SD Memory Card or
delete unwanted images or sound.(p.16, 80)
You may be able to save the image by changing the quality
level or recorded pixels.(p.40, 41)
An SD Memory Card has not been inserted into the
camera.(p.16)
There are no images or sound saved in the SD Memory
Card that can be played back.
Displayed when the printer is out of ink in PictBridge mode.
Advertisement
Table of Contents
