Table of Contents
Advertisement
Taking Pictures
4
Program Mode
In Program mode (e), you can set all the functions and take pictures.
1
Press the four-way controller (3) in Capture mode.
The Virtual mode dial is displayed.
2
Press the four-way controller (45)
to select [e].
3
Press the OK button.
The camera is ready to take the picture.
4
Set the functions you want to use.
See "Setting the Capture Functions" (p.36-
p.49) for instructions.
5
Lightly Press (Halfway) the Shutter Release Button.
When the subject is in focus, the LCD monitor's focus frame turns
green.
6
Press the shutter release button down fully.
The picture is taken.
50
Shutter release button
Four-way controller
OK button
Taking Still Pictures 1p.26
SNAP
OK
OK
Advertisement
Table of Contents
