Table of Contents
Advertisement
Powering the Camera
Installing the Batteries
Install batteries in the camera. Use one CR-V3, or use two AA Ni-MH
batteries, or AA alkaline batteries. Turn off the camera when setting
batteries. Wipe away water or dirt from the camera with a dry cloth
before setting batteries. Do not set batteries with wet or dirty hands.
1
Slide the battery cover in the direction of the arrow, and
flip open.
2
Insert the batteries according to the +- indicator in
the battery chamber.
3
Close the battery cover and push horizontally to lock.
When using for a prolonged period, please use the AC adapter D-AC5
(p.15).
• AA alkaline battery, and the CR-V3 battery are not rechargeable.
• Do not open the battery cover or remove the batteries when the power
switch is on.
• When you will not use the camera for a long while, remove the
batteries. Otherwise, the battery may leak.
• If the date and time settings have been reset when you insert new
batteries after a long while, follow the procedure for "Setting the Date
and Time" (p.24).
• Insert batteries correctly. Wrong insertion can cause a camera
breakdown.
1
2
(Using AA batteries)
3
(Using CR-V3)
1
13
Advertisement
Table of Contents
