Changing The Start-Up Screen - Pentax Optio 43WR Operating Manual

User manual
Hide thumbs Also See for Optio 43WR:
Table of Contents

Advertisement

Changing the Start-up Screen

You can display an image recorded with the camera as the welcome
screen when the camera is turned on.
1
Select [Screen Setting] on the [B Set-up] menu.
2
Press the four-way controller (5).
The Screen Setting screen will be displayed.
3
Press the four-way controller (5).
The screen for changing the start-up screen
will be displayed.
4
Press the four-way controller (45)
to select O (On) or P (Off).
Displays the start-up screen.
O
Does not display the start-up screen.
P
5
Press the b button.
6
Use the four-way controller (45) to select the image
you want to display as the start-up screen.
7
Press the OK button 4 times.
The camera is ready for capture or playback.
Once the start-up screen has been set, it will not be erased even if the
original image is deleted or the SD Memory Card is formatted. To delete
the start-up screen, reset the setting. (1p.107)
Change Start-up
Start-up Screen
Optio
Image
Exit
MENU
OK
OK
9
103

Advertisement

Table of Contents
loading

Table of Contents