Selecting The Flash Mode - Pentax Optio 43WR Operating Manual

User manual
Hide thumbs Also See for Optio 43WR:
Table of Contents

Advertisement

Selecting the Flash Mode

(No icon) Auto
Flash Off
a
Flash On
b
Auto flash + red-eye
c
reduction
Flash On + red-eye
d
reduction
• The flash is always off when the Capture mode is set to C,
Continuous shooting, Infinity-Landscape, or Fireworks.
• When using the flash, it always discharges once before taking the
picture, to assist with metering.
• In [Auto flash + Red-eye Reduction] and [Flash On + Red-eye
Reduction] modes, the flash discharges once to make the pupils of the
subjects eyes smaller shortly before the main flash discharges to take
the picture.
• The shutter speed will be slower with the flash off, or in low light
conditions such as a night scene. Use a tripod to prevent camera
movement.
1
Press the b button in Capture mode.
This will switch Flash modes, and the current icon will be displayed on
the LCD monitor.
The camera is ready to take a picture in the selected Flash mode.
The flash discharges automatically based on light
conditions.
The flash never discharges regardless of light
conditions.
The flash always discharges regardless of light
conditions.
Reduces red-eye in the picture, caused by the flash
reflecting from the subject's eyes. The flash
discharges automatically.
Reduces red-eye in the picture, caused by the flash
reflecting from the subject's eyes.
The flash discharges regardless of lighting conditions.
Status of the Flash Status Lamp 1p.27
Saving the Flash Mode 1p.70
b
4
39

Advertisement

Table of Contents
loading

Table of Contents