Printing Using Printing Service Settings; Disconnect The Camera From The Printer - Pentax Optio 43WR Operating Manual

Printing Using Printing Service Settings

1
On the [Select printing mode] screen, press the four-
way controller (23) to select [DPOF AUTOPRINT].
2
Press the OK button.
The [Print w/DPOF settings] screen is displayed.
Use the four-way controller (45) to check the images and printing
service settings.
3
Use the four-way controller (23)
to select an image to print.
4
Press the OK button.
You can print using the printing service
settings specified for the selected image.
The message "Continue printing?" is
displayed after the image has been printed. To continue printing, press
the OK button to return to the screen displayed before printing.
5
When you have finished printing, press the MENU
button.
The "Safely remove USB cable" message is displayed.

Disconnect the Camera from the Printer

1
Turn the camera off.
2
Disconnect the USB cable from the camera.
3
Disconnect the USB cable from the printer.
Pressing the MENU button when the "Continue printing?" message is
displayed causes the "Safely remove USB cable" to be displayed.
When the USB cable is disconnected from the camera while the camera
is turned on, the camera automatically switches to the Capture mode.
100-0001
Print w/DPOF settings
Copies
01
05
Total
Exit Exit Exit Print Print Print
MENU OK
7
91