Setting The Alarm - Pentax Optio 43WR Operating Manual

Setting the Alarm

1
Press the MENU button.
2
Press the four-way controller (5).
The [Q Playback] menu will be displayed.
3
Press the four-way controller (23) to select [Alarm].
4
Press the four-way controller (5).
The list of alarms will be displayed.
5
Press the four-way controller (23)
to select alarm 1, 2, or 3.
6
Press the four-way controller (5).
The screen for setting the Alarm mode and
time will be displayed.
7
Press the four-way controller (23)
to select the number of times the
alarm will ring.
Everyday : The alarm will ring everyday at
Once : The alarm rings once at the set time.
Off : The alarm will not ring.
8
Press the four-way controller (5).
9
Press the four-way controller (23) to set the time
(hour) the alarm will ring.
10
Repeat steps 8 and 9 above to set the alarm time
(minute) and set S (Snooze) to O (On) or P (Off).
If the Snooze is set to O, the alarm will ring 5 times at 5-minute intervals.
11
Press the Z button.
12
Press the four-way controller (45) to select the image
to be displayed when the alarm rings.
13
Press the OK button.
14
Press the OK button 3 times.
"Alarm was set" is displayed and the camera switches off.
When the camera is turned off and the set time is reached, the alarm will
ring for one minute. After the alarm turns off, the camera will turn off
automatically.
the set time.
Alarm
5:30AM
1 Once
2 Off 7:30AM
12:00PM
3 Off
Exit OK
MENU OK
Alarm 1
Once 5:30AM
No Image
Image Exit OK
MENU OK
9
109