Table of Contents
Advertisement
Figure 70. Connecting a SATA hard disk drive
7. Position the new hard disk drive into the hard disk drive bay and align the screw holes in the new hard
disk drive with the corresponding holes in the drive bay assembly. Then, hold the new hard disk drive
from one side of the drive bay assembly and install the four screws from the other side to secure the
new hard disk drive in place.
Figure 71. Installing the hard disk drive
8. To complete the replacement, go to "Completing the parts replacement" on page 132.
Replacing the card reader
Attention
Do not open your computer or attempt any repair before reading and understanding the "Important safety information"
in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre
Safety and Warranty Guide, go to:
http://www.lenovo.com/support
This section provides instructions on how to replace the card reader.
.
Chapter 9
Replacing FRUs (Machine Types: 0889, 5023, and 7844.)
127
Advertisement
Table of Contents
