Table of Contents
Advertisement
6. Remove any parts and disconnect any cables that might prevent your access to the memory slots.
7. Do one of the following:
• If you are replacing a memory module, open the retaining clips and remove the old memory module
that is currently installed.
Figure 46. Removing the memory module
• If you are installing a memory module, open the retaining clips of the memory slot into which you
want to install the memory module.
Figure 47. Opening the retaining clips of the memory slot
8. Position the new memory module over the memory slot. Make sure that the notch
module is aligned with the key
into the memory slot until the retaining clips close and the new memory module snaps into position.
108
ThinkCentre Hardware Maintenance Manual
2
in the memory slot. Then, press the new memory module straight down
1
on the new memory
Advertisement
Table of Contents
