Table of Contents
Advertisement
Figure 75. Pivoting the drive bay assembly downward
5. Connect the new power button board cable to the system board.
6. Reinstall the removed parts. To complete the replacement, see "Completing the parts replacement" on
page 55.
Replacing the card reader
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove the computer cover. See "Removing the computer cover" on page 14.
2. Remove the front bezel. See "Replacing the front bezel" on page 15.
3. Remove the power button board. See "Replacing the power button board" on page 44.
4. Disconnect the card reader cable from the system board.
5. Replace the card reader.
.
Chapter 4
Replacing hardware
47
Advertisement
Table of Contents
