Removing an Optical Drive
CAUTION:
computer.
To remove an optical drive:
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Remove the front bezel
4.
Disconnect the power cable (1) and data cable (2) from the rear of the optical drive.
Figure 8-7
5.
Rotate the drive cage all the way up.
Figure 8-8
All removable media should be taken out of a drive before removing the drive from the
(Access Panel on page
(Front Bezel on page
Disconnecting the Power and Data Cables
Rotating the Drive Cage Up
(Preparation for Disassembly on page
92).
93).
91).
Drives 101