Bezel Blanks - HP dx7500 - Microtower PC Service & Reference Manual
Service reference guide: hp compaq dx7500 business pc
Hide thumbs
Also See for dx7500 - Microtower PC:
- Hardware reference manual (59 pages) ,
- Troubleshooting manual (53 pages) ,
- Utility manual (12 pages)
Table of Contents
Advertisement
Bezel Blanks
On some models, there are bezel blanks covering the 3.5-inch and 5.25-inch external drive bays that
need to be removed before installing a drive. To remove a bezel blank:
1.
Follow the instructions described in
2.
Press the two retaining tabs towards the outer left edge of the bezel (1) and pull the bezel blank
inwards to remove it (2).
Figure 7-4
50
Chapter 7 Removal and Replacement Procedures Microtower (MT) Chassis
Removing a Bezel Blank
Front Bezel on page
49.
- Quick Links:
- Computer Setup-Boot
- Rom Flash
Hide quick links:
Advertisement
Table of Contents
