Run Simulations - Autodesk 466B1-05A761-1304 - AutoCAD Inventor Simulation Suite 2010 Getting Started Manual

Run Simulations

The Simulation Player contains several fields including:
1 Final Time
2 Images
3 Filter
4 Simulation Time
5 Percent of Realized Simulation
6 Real Time of Computation
Simulation Panel
Final Time field
Images field
Filter field
Simulation Time
Value
Percent value
Real Time of Compu-
tation value
52 | Chapter 8 Simulate Motion
Controls the total time available for simulation.
Controls the number of image frames available for a
simulation.
Controls the frame display step. If the value is set to
1, all frames play. If the value is set to 5, every fifth
frame displays, and so on. This field is editable when
simulation mode is active, but a simulation is not
running.
Shows the duration of the motion of the mechanism
as would be witnessed with the physical model.
Shows the percentage complete of a simulation.
Shows the actual time it takes to run the simulation.
It is affected by the complexity of the model and the
resources of your computer.